Copper

Copper products catered by us is of superior quality and caters to the requirements of various industries. These nickel alloy products are available in different specifications as per the requirements of the clients. Our range includes nickel alloy pipes, nickel alloy tubes, nickel alloy fittings, nickel alloy butt weld fittings, nickel alloy bars, nickel alloy sheets, nickel alloy plates and nickel alloy fasteners. Also available are Cupro-nickel alloys in above mentioned forms in various grades.

Available forms are Copper Pipes & Tubes, Copper Round Bars, Copper Sheets & Plates, Copper Pipe Fittings, Copper Forged Fittings, Copper Fasteners, Copper Flat / Angle / Channel, Copper Flanges.

 

Copper Nickel Pipe Fittings

Range : 1/2" NB TO 06"NB IN SCH: 10s, 40s, 80s.

Type : SEAMLESS / WELDED/ FABRICATED

Form Elbows in Long & Short Radius in 45 deg, 90 deg, 180 deg, Equal, Unequal Tee, Bend, Eccentric Reducer & Concentric Reducer, Caps & Crosses, Long & Short Stub End, Swage Nipple & Barrel Nipple.

Copper Nickel Forged Pipe Fitting Range Forged Fittings :

¼” NB to 4” NB in 3000 LBS, 6000 LBS

Outlet’s : ¼” to 24” in 3000 LBS, 6000 LBS

Type : Socket Weld (S/W) & Screwed (SCRD)

Form : Elbow 45 deg & 90 degree, Tee , Union, Full & Half coupling, Cross, Cap, Swage Nipple, Plug, Bush

Outlet’s : Weldolet, Sockolet, Elbolet, Threadolet, Nipolet, Letrolet, Swepolet

Other Form

• Hydraulic Fittings
• Instrumentation Fittings

Copper Nickel Pipe Fittings

Standard : ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30).

Test Certificate : Manufacturer Test Certificate as per EN 10204 / 3.1

Copper Nickel Flange

Range : ½” NB to 12” NB

Standard : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, ASA 150#, ASA 300# DIN ND 6,10,16,25,40 Etc.

Type of Flanges

• Weld Neck Flanges – WNRF
• Socket Weld Flanges - SWRF
• Slip On Raise Face - SORF
• Blind Raise Face – BLRF
• Lap Joint
• Screwed ( Threaded )
• Long Weld Neck
• Reducing
• Spectacle Blind
• Ring Joint
• Large Dia Ring

Copper Nickel Flanges

Standard : ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE

Test Certificate : Manufacturer Test Certificate as per EN 10204 / 3.1

Copper Nickel Tube

Range : 6.35 mm OD upto 254 mm OD in 0.6 TO 20 mm thickness.

Type : Seamless / ERW / Welded

Form : Round, Square, Rectangular, Coil, U Tube, Pan Cake.

Length : Single Random, Double Random & Required Length

End : Plain End, Bevelled End

Copper Alloy Tube

Copper Tube : Electrolytic / Dioxide

Copper Nickel Tube / Cupro Nickel Tube :

ASTM / ASME SB 111 UNS NO. C 70600 ( CU -NI- 90/10) / C 71500 ( CU -NI- 70/30) / C 71640 ( CU-NI-66/30/2/2)

Admiralty Brass Tube : ASTM / ASME SB 111 UNS NO. C 44300 ( ALLOY 443)

Aluminium Brass Tube :

ASTM / ASME SB 111 UNS NO. C 68700 ( ALLOY 687)

Test Certificate : Mill Test Certificate as per EN 10204 / 3.1

Copper Nickel Bar

Range : 10 mm To 150 mm Dia in 100 mm TO 5000 mm Length

Copper Nickel Bar

• C 70600 - COPPER NICKEL 90/10 Bar
• C 71500 - COPPER NICKEL 70/30 Bar

Copper Alloy Bar : Electrolytic Copper, Electrolytic Tough Pitch Copper, Deoxidised Copper, General Purpose Commercial Copper

GUNMETAL, PHOSPHER BRONZE

85/5/5/5, 88/10/2, 90/10, Ingots, Hollow, Bar, Bushes & Sheet, Strips, Wires etc. as per requirement

Other Materials

• Copper Nickel Bar
• Brass Bar
• Phosphorus Bronze Bar
• Gun Metal Bar

Test Certificate : Mill Test Certificate as per EN 10204 / 3.1